GF Electrofusion Fittings

GF Electrofusion Fittings
Pipes, fittings, valves and other components need to be connected safely and reliably. Whether in water or gas distribution, for mains lines and service lines a safe connection is always a primary concern… GF Piping Systems has the right solution even for your most difficult connections.GF is considered to be a pioneer, as well as one of the best known producers, utilising the most advanced technology in the world. The GF Electrofusion range includes Couplers, Saddles, Fittings, Branch Saddles and Transition Fittings.

For specific part numbers and fitting information or to request a Georg Fischer Electrofusion Brochure please discuss your needs with our Sales Team.
GF Electrofusion Fittings

GF Electrofusion Fittings

ELGEF Plus Electrofusion Couplers

Wide range of Couplers available from 20mm to 630mm diameter PE100 SDR11 suitable for 16 bar Water, 10 bar Gas. Equipped with 4mm diameter pins and limited path fusion indicators.

Fields of Application: 
• Water and gas distribution
• Industrial pressure applications
• Transport lines, distribution lines, house connections

Advantages: 
• Easy assembly due to the tapered socket mouth
• Each electrofusion socket has a smooth inside surface with a protected resistance wire permitting a thorough and simple removal of possible on-site contamination
• The dynamic pitch of the heating coil results in optimum joint quality
• Clear identification with large and easily understandable product marking
• Large and effective fusion area for your safety
• Ideal gap closing characteristics for reliable PE large pipe joints
• Integrated pipe fixation up to d63 mm for fast and safe installation
• Removable centre stop up to d160 mm – a coupler for all applications

ELGEF Plus Saddles

ELGEF Plus Modular Saddles comprise a complete product package: tapping saddles, pressure tapping valves, stop-off saddles, repair saddles and spigot saddles.

The Branch Saddle is at the heart of the modular system meaning all requirements are covered with just a few components.

Fields of Application:
• Water and gas distribution
• Distribution lines, house connections

Advantages:
• Complete system with just a few parts
• Reduced stock volume with savings of up to 50%
• 360° rotation of outlet permits infinitely variable positioning and wide freedom of movement during assembly
• Vertical or horizontal fixation possible – exactly as site conditions dictate
• Easy, flexible and fast attachment, therefore, substantially lower costs

Products: 
• Branch saddle, tapping saddle, tapping saddle with Gas-Stop, pressure tapping valve
• Stop-off saddle, repair saddle, spigot saddle

ELGEF Plus Electrofusion Fittings

The electrofusion fitting programme is unique for two reasons. Firstly, due to the complete range of elbows, tees, reducers and end caps extending from d20 to d250 mm. Secondly, because of the unlimited possibilities offered when combining such fittings in the sizes d20 to d63 mm with modular transition adapters.

Fields of Application: 
• Water and gas distribution
• Industrial pressure applications
• Transport lines, distribution lines, house connections

Advantages: 
• Single source supplier – complete range even up to the very largest dimensions
• Extensive variety of combination possibilities and ease-of-assembly with the modular transition adapters
• Easy user-friendly pre-assembly due to integrated pipe fixation up to d63 mm
• Highly automated manufacturing and process technology for flawless products
• Tees may be connected using couplers or reducers

Products: 
• Elbow 90°, elbow 45°, tee, tee reduced, reducer, end cap

ELGEF Plus Branch Fitting

The ELGEF Plus branch fitting offers a user friendly solution for new installations or network extensions.

Whether a new installation, subsequent tie-in of mains or service line, hydrant connection, renovation or repair work – these branch fittings are faster and easier to use than standard tees.

Fields of Application: 
• Water and gas distribution
• Industrial pressure applications
• Transport lines, distribution lines

Advantages: 
• Branch fittings can be installed and tapped under live mains conditions ? so the main line must not be shut down or bypassed like when using tees
• Fewer fittings required resulting in savings for material costs
• Lower installation costs thanks to easy handling
• Conventional tapping procedures, i.e. the use of existing, conventional tooling is possible
• Integrated pipe fixation for the branch outlet

ELGEF Plus Transition Fittings

The unique ELGEF Plus modular range of transition fittings permits wide product utilisation but is, nevertheless, limited to just a few component parts: transition couplers, 45° and 90° transition elbows, transition tees and transition reducers.

All bodies are available either in brass or stainless steel with male or female threads and also with a loose collar. Therefore, you can decide in advance which fitting and transition should be taken from stock and combined for particular on-site applications.

Fields of Application: 
• Water distribution
• House connections

Advantages: 
• Modular concept – diverse combinations – only a few parts
• Matching, fully interchangeable fittings and transitions
• Low costs due to minimised stock volume
• Brass and stainless steel transition adapters are available
• Rotating transition adapters provide easy installation also under difficult installation conditions

Products:
• Transition adaptor PE/Brass, Transition adaptor PE/Stainless Steel

By continuing to use the site, you agree to the use of cookies. Certain features may not function correctly without them. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close