Stainless Steel Fittings

Repair Clamps

Repair Clamps

HY-RAM Repair Clamps, Underpressure Tees & Fittings
Branded Hy-Ram, the repair clamps and fittings are flexible; consisting of one or more stainless steel clamp sections covered with a rubber gasket. They are used for a quick, easy and permanent repair or connection to broken, corroded or damaged water and gas pipes. They can be installed on Ductile Iron, Grey Cast Iron, Steel, Asbestos Cement and Plastic pipes with working pressures up to 30 bar.
Repair Clamps

Repair Clamps

Threaded Outlet Clamps

Hy-Ram Stainless Steel Branch Clamp
The Hy-Ram Stainless Steel Branch Clamp can be supplied with various tapped outlets.

The standard internal screw threads are 1/2″ – 3″ but alternative threads are available on request. The Branch Clamp can also be supplied with external screw thread or a combination of internal and external screw threads.

Other dimensions are available on request.
Threaded Outlet Clamps

Threaded Outlet Clamps

Hy-Ram Stainless Steel T & TS Clamp

Typical Application: 
For making flange connections (PN16) underpressure (see diagram).

T Clamp Range & Dimensions:
The T Clamp is made up of two parts and has a range of 20 mm.

For larger diameters (from DIN 500), the T Clamp is made up of three parts and has a range of 30 mm. (Larger ranges are available on request)

The length of the clamp depends on the size of the flange and the pipe diameter, but is a minimum of 500 mm.

TS Clamp Range & Dimensions:
The TS Clamp made up of two parts and is made to measure (i.e. no range)
The TS Clamp is extra heavy duty having a casing made from 6 mm thick stainless steel with the fixing supports and bolts also made of extra heavy materials.
Hy-Ram Stainless Steel T & TS Clamp

Hy-Ram Stainless Steel T & TS Clamp

Hy-Ram Stainless Steel Emergency Repair Kit

Applications: 
For effecting emergency repairs to a range of pipes with one boxed kit.

Range & Dimensions:
One kit to cover pipes ranging from 88mm to 780mm OD.
Standard length is 400mm, also available in 500mm and 600mm lengths.
Standard rubber gasket: EPDM, Certified for water. NBR available on request.
Emergency Repair Sets

Emergency Repair Sets

By continuing to use the site, you agree to the use of cookies. Certain features may not function correctly without them. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close