 |
|||||||||||||||||||||||||||||||||||||||||||||
High Quality Towing HeadsFor pulling pipe in sizes 22 mm – 355 mm diameter on both SDR17 & SDR11. Useful for a variety of applications including winching, directional drilling and dispensing coiled pipe. Towing heads come with high tensile drop forged steel eyebolts, solid aluminium noses (125-280mm) and have a proven tooth profile for proven gripping power.
|
 |
||||||||||||||||||||||||||||||||||||||||||||
21/26 Series Towing HeadsFor use with thin wall high density, skinned pipe. These towing heads come with high tensile drop forged eye bolts, tooth profile that doesn’t damage the pipe, outside sleeve to stop the pipe splitting and covers 63mm to 180mm. The towing heads are specially designed for SDR21 ProFUSE™ pipe.
|
 |
||||||||||||||||||||||||||||||||||||||||||||
Gripper SetsTowing Head SDR21/26 Gripper Sets For Towing Heads from 200mm, spare gripper sets can be purchased to fit standard towing heads, to accommodate SDR 21/26. By removing the standard gripper set and replacing with a new set the existing nose, eyebolt and tail can be utilised.
|
 |
||||||||||||||||||||||||||||||||||||||||||||
Mudtight GOLD™The Mudtight GOLD™ Towing Head was designed to solve the problem of sealing the pipe without adding too much bulk to the outside diameter. It’s patented sealing cartridge seals on the inside of the pipe and is reversible so that it will seal on both SDR 11 and SDR 17.6 pipe. The towing head grips beyond the yield strength of the pipe and is pressure tight up to bursting.
|
 |
||||||||||||||||||||||||||||||||||||||||||||
PE Fuse On Towing HeadsMachined from solid MDPE rod and range in size from 63mm to 500mm. They have sealed eyebolts and a stepped design at the back for easy butt fusion to either SDR11 or 17.6 pipe.
|
 |
||||||||||||||||||||||||||||||||||||||||||||
